Application Recommendations:
Drying: HY-COVER requires heat fixation of 150°C for 3 minutes. The addition of cross linker at approximately 2% will reduce the temperature required to approximately 120°C.
Mesh: Monofilament polyester mesh 43-90T (110-225 tpi)
Stencil: Water-resistant, completely dried, and fully cured.
Additives: Hydrotex retarder may be added to HY-COVER, typically no more than 2% would be required unless extremely hot/dry ambient conditions prevailed.
Fabrics: Cotton, Polyester, Cotton-Polyester Blends, silk, and most synthetic fabrics
Cleanup: Water
