Colour that give the textile a rich pearlescent look.
Mesh: For Pearlescent colour, monofilament mesh in the range of 43T to 48T metric ( 110T to 102T U.S ) is recommended
Stencil: All Hydrotex products require the use of a water-resistant type of stencil.
Curing: Hydrotex products should be heat-cured for approximately 150 degrees C / 300 degrees F for 3 minutes . Fabrics that cannot withstand this temperature should be tested at lower temperatures for a longer duration.
Clean Up: All hydrotex products are water-based and equipment is easily cleaned with water. Ink should not be allowed to dry in screens as clogging and staining can result.